Maintenance of the grinding machine

1. Bearings bear all the load of the machine, so good lubrication has a great impact on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and well sealed. The main oil injection points of this machine are (1) rotating bearings (2) rolling bearings (3) all gears (4) movable bearings and sliding surfaces
2. Newly installed wheels are prone to looseness and must be inspected regularly
3. Pay attention to the normal operation of various parts of the machine
4. Pay attention to checking the wear level of easily worn parts and always replace worn parts
5. The bottom frame plane of the movable device should be cleaned of dust and other objects to prevent the movable bearing from moving on the bottom frame when the machine encounters materials that cannot be broken, resulting in serious accidents
6. If the bearing oil temperature rises, it should be stopped immediately to check and eliminate the cause
7. If there is any impact sound during the operation of the rotating gear, it should be immediately stopped for inspection and eliminated